If you want to change to a different server then it is best to start from a fresh rasbian install. However, there are a number of good alternatives out there that offer a wider field of view.
For example: Raspberry Pi Camera Board - Night Vision & Fisheye 160° Lens - https://
limit=50 Raspberry Pi Camera Board - Fisheye 160° Lens - https://
limit=50 Raspberry Pi Camera Board - Fisheye 222° Lens - https://
Since then, thanks to the help of many other programmers, it has become the best interface to control the RPi Cam over your browser.
Remember, anyone can create an account on here and add to this wiki.
Clicking on the image will toggle between normal and full screen mode.
It can also be put into a motion detection state where motion will trigger activity like a video recording.
Autostart should be yes if you want this software to start automatically when raspberry boots up. Change it to yes if you have external software that needs direct access to the image file.
A phpversion parameter provides for a choice on which php version to use (5 or 7). If there any difficulties using 7 or when upgrading older systems then try using 5.
Step 1: Install Raspbian on your RPi Step 2: Attach camera to RPi Step 3: Important : Enable camera support ( Step 4: Update your RPi with the following commands: Occasionally if camera core software updates have been done then a sudo rpi-update may be used to benefit from these before they become available as standard.
Step 4: For Jessie Lite run sudo apt-get install git Clone the code from github and enable and run the install script with the following commands: Older versions needed the scripts to be made executable with chmod u x *If you get permission denied while trying to run the install scripts then try that step 6 separate scripts are provided to do separate installation and maintenance functions.